Ricoh FT4460, Service Manual, Page: 197 / 413

23 May 1989
4.6.2 User Code Counter Check (SP Mode #91)
The contents of each user counter (20 codes) can be checked using the fol-
lowing procedure:
1.
2.
3.
4.
Select SP Mode #91 using the numeric keys.
Press the Enter (#) key.
Select the desired user code using the “+” and “-” (zoom “up” and
“down”) keys. The last two digits (1 to 20) of the user codes are displayed
in the copy counter.
Press the “.” key to display the second three digits in the Magnification in-
dicator. In case the “.” key is not pressed, the first three digits are dis-
played in the Magnification indicator.
4.6.3 User Code Counter Reset
The copy counters of all user codes can be cleared by the following proce-
dure:
1. Select SP Mode #92 using the numeric keys.
2. Press the Enter (#) key.
3. Press the “1” key to reset all user code counters (20 codes).
4. Press the Enter (#) key.
4-37