manualshive.com logo in svg

Ricoh FT4460, Service Manual, Page: 125 / 413

Share
Download
Ricoh FT4460 Service Manual Download Page 125

28 February 1989

10.2 FUSING DRIVE RELEASE MECHANISM

The fusing unit drive release mechanism automatically disengages the fusing

unit drive gear [A] when the front cover [B] is opened. This allows the fusing
unit drive gear to rotate freely so that jammed paper can be easily removed.

When the front cover is opened, the safety lever is released and the release

shaft [D] rotates as shown above. This moves the release pin [E] upwards,

thus disengaging the fusing unit drive gear from the hot roller gear.

The leaf spring [F] forces the fusing unit drive gear downwards and keeps it

engaged when the front cover is closed.

2-72

Summary of Contents for FT4460






























































































































































































































































































































































































































Reviews:

No comments