Ricoh FT4460, Service Manual, Page: 194 / 413

23 May 1989
4.5 SERVICE PROGRAM SP-9 DATA OUTPUT GUIDE TABLE
- How to use this table -
1.
2.
3 .
4.
After “9” is entered, press the Enter (#) key.
Enter the desired output number using the numeral keys according to the
table.
Press the Start key to turn on the electrical component.
Press the Clear/Stop key to turn off the electrical component.
CAUTION: To prevent the gear from being damaged, remove the first cas-
sette when checking SP#27 (1st Lift Motor).
Output
No. Electrical Component
1
Main Motor (Copier)
2 Main Corona Standard Grid (Copier)
3 Main Corona ID Sensor Grid (Copier)
4 Main Corona VR Grid (Copier)
5
Transfer Charge (Copier)
6
Transfer Transfer Up Charge (Copier)
7 Separation Charge (Copier)
8 Black Development Unit Set Mode (Copier) NOTE 1
9 Color Development Unit Set Mode (Copier) NOTE 2
10 Development Drive MC (Copier)
11 Toner Supply MC (Copier)
12
PTL/QL (Copier)
13 Red Erase Solenoid (Copier)
14 Roller Drive Motor (Sorter)
15 Wheel Drive Motor: Bin Up (Sorter)
16 Wheel Drive Motor: Bin Down (Sorter)
17 Registration MC (Copier)
18
Relay Roller MC (Copier)
*19
5th Gate MC (Paper Bank)
20 1st Paper Feed MC (Copier)
21
2nd Paper Feed MC (Copier)
22 3rd Paper Feed MC (Copier)
*23
4th Paper Feed MC (Paper Bank)
*24 5th Paper Feed MC (Paper Bank)
* Not for use in this model.
4-34