Ricoh FT4460, Service Manual, Page: 173 / 413

5.
*
*
28 February 1989
Press the Enter key.
Service program mode is cleared by pressing the Clear Modes key.
If an invalid SP number is entered and the Enter key is pressed, “0” is dis-
played in the copy counter.
4.2.3 Memory Clear Procedure
<SP-97 “Clears service call counters and jam counters”>
Service Program SP-97 is used to clear all self-diagnostic counters and paper
jam counters.
To perform this clear function, the following procedure must be performed.
1.
2.
3 .
4.
5.
6 .
Turn main switch OFF.
Turn On DIP SW1-3 & 4 on the operation panel and turn the main switch
ON .
Select Service program SP-97 and press the “1” key on the key pad, then
press the Enter key.
At this point Service Programs SP-120 through 131 will be cleared, and
default to “0”.
Turn off the main switch.
Turn DIP SW1-3 and 4 off.
Turn the main switch ON to resume normal copier operation.
<SP-98 “Clears all counters”>
Service Program SP-98 is used to clear all copy counters, self- diagnostic
counters and jam counters at once.
To perform this clear function, follow the same procedure as previously
describe but using SP-98 instead.
The following programs will be cleared:
1) SP-100 through SP-131
2) SP83, 84, and 85 (color copy counter)
3) SP-88 (PM counter)
4) All User Programs are cleared
4-13