Ricoh FT4460, Service Manual, Page: 175 / 413

28 February 1989
4.3 SERVICE PROGRAM MODE TABLE
*: Accessible through the key board
(Sales/Customer Access Mode)
Mode No.
1 SP Mode Data
5 Exposure
Lamp OFF
Free Run
6 Jam Detec-
tion OFF
7 Call Service
Indicator
8 Input Check
9 Output Check
*10 Color
Developer
Conditioning
*11 All Indicators
ON
*15 Auto Reset
Time
*16 Count
Up/Down
*17 Auto Cas-
sette Shift
Make copy of SP
mode data sheet.
Free run with ex-
posure lamp OFF.
Copies are made
without jam detec-
tion.
Indicates which sec-
tion has problem.
Displays the input
from sensors.
Electrical com-
ponent turns on.
Used to condition
the color developer.
Turns on all the in-
dicators on the
operation panel.
Selects auto reset of
1 or 3 minutes.
Selects count up or
count down.
Selects auto cas-
sette shift mode.
Data
1: PM cycle
2: ID sensor
failure
3: Full toner
0: 1 min.
1: 3 min.
2: none
0: UP
1: DOWN
0: YES
1: NO
Factory
Setting
0
0
0
Comments
Check the setting
data of SP mode.
Check function of
machine.
Indicates data No.
1, 2, 3, 12, 13, 23
or 123.
For data, see the
data input guide
table.
For data, see the
data output guide
table.
Buzzer sounds
after color
developer con-
ditioning (20 cycle)
is completed.
Copier automatical-
ly shifts to another
cassette holding
same size paper
when paper runs
out.
4-15