Ricoh FT4460, Service Manual, Page: 134 / 413

28 February 1989
No paper feed:
1) 1st and 2nd feed station Checked by the registration sensor about 1.5
2) 3rd feed station
seconds after the 1st and 2nd feed MC is
turned on.
Checked by the upper relay sensor about 1.6
seconds after the 3rd feed MC is turned on.
Paper does not reach the registration sensor:
1) 1st and 2nd feed station Same as no paper feed.
2) 3rd feed station Checked by the upper relay sensor about 1.7
seconds after the 3rd feed MC is turned on./
Paper does not reach the fusing exit sensor:
1) Checked about 3.5 seconds after the registration MC is turns on.
Paper does not reach the inverter sensor:
1) Check about 2.3 seconds after the fusing exit sensor is turned on.
Paper from inverter section does not reach the inverter relay sensor:
1) Checked about 7.9 seconds after the fusing exit sensor is turned on.
Paper does not reach the inverter relay sensor in overlay mode:
1) Checked about 2.6 seconds after the fusing exit sensor is turned on.
Paper does not reach the registration sensor in overlay (duplex) mode.
1) Checked about 10.7 (14.4) seconds after the fusing exit sensor is turned
on.
2-81