Ricoh FT4460, Service Manual, Page: 184 / 413

28 February 1989
Mode No.
85 Color Copy
Count (Blue)
*86 Highlight
Color Density
Adjustment
87 PM Copy
Count
88 PM Counter
Check
89 PM Counter
Reset
*90 User Code
Mode
*91 User Code
Counter
Check
*92 User Code
Counter Reset
Function
Displays the total
number of blue
copies.
Adjusts the density
in Highlight Color
mode.
Sets the interval of
the PM counter
Displays contents of
the PM counter.
When the PM count
is exceeded, the
Service Call in-
dicator blinks and
Key Counter in-
dicator lights.
Resets the PM
counter
Selects user code
mode. (Key counter
shorting connector
must be removed.)
Displays the con-
tents of each user
counter. Use “+”
and “-” (“up” &
“down”) keys to
select user code.
(The last two digits
of user code are dis-
played in the copy
counter.)
Resets counters of
all user codes.
Data
1 - 7
0: No PM
1: 40K
2: 60K
3: 80K
4: 100K
0: OFF
1: ON
0: No
1: Yes
Factory
Setting
4
0
0
Comments
Press # key to dis-
play the first three
digits in the Mag-
nification indicator.
Press “.” key to dis-
play the second
three digits.
1: Darker
4: Normal
7: Lighter
Press # Key to dis-
play the first three
digits in the Mag-
nification indicator.
Press “.” key to dis-
play the second
three digits.
Use after perform-
ing PM.
If on, must enter a
code to copy. See
user code table.
Reset after 60s or
if C/S and Clear
Modes pressed
together.
User counters
count from 0 to
999999.
Press # key to dis-
play the first three
digits in the Mag-
nification indicator.
Press “.” key to
display the second
three digits.
To reset, press “1”
then the “#” key.
4-24