Ricoh AP-C3, Field Service Manual, Page: 904 / 1334

Jam Code
SP
Display Description
LCD
Display
7504 103 Finisher Exit (D588)
Lower tray exit sensor does not detect paper
after the stack feed-out belt has fed paper.
Lower tray exit sensor still detects paper after
the stack feed-out belt has returned to the
home position.
R3-R5
7504 104 - - -
7504 105
Finisher Tray Lift Motor
(D588)
Stack height sensor does not detect paper
after the lower tray has lifted up.
Stack height sensor still detects paper after the
lower tray has lifted down.
R1-R2
7504 106
Finisher Jogger Motor
(D588)
Jogger fence HP sensor does not turn off after
the jogger fence has moved from its home
position.
Jogger fence HP sensor does not turn on after
the jogger fence has returned to its home
position.
R3-R5
7504 107
Finisher Shift Motor
(D588)
Shift roller HP sensor does not turn off after the
shift roller has moved from its home position.
Shift roller HP sensor does not turn on after the
shift roller has returned to its home position.
R1-R2
7504 108
Finisher Staple Motor
(D588)
Stapler HP sensor does not turn off after the
stapler has moved from its home position.
Stapler HP sensor does not turn on after the
stapler has returned to its home position.
R3-R5
7504 109
Finisher Exit Motor
(D588)
Stack feed-out belt HP sensor does not turn off
after the stack feed-out belt has moved from
its home position.
Stack feed-out belt HP sensor does not turn on
after the stack feed-out belt has returned to its
home position.
R3-R5
7504 191
Finisher Entrance: EUP
(D637/D636) Paper does not reach the finisher entrance
sensor or stays at the finisher entrance sensor.
R1-R4
6. Troubleshooting
902