
• If the job is canceled before storage on the Scan Router server finishes, the counts are not done.
• The count is executed even if regardless of confirmation of the arrival at the Scan Router server.
8 671
T:Deliv PGS/PC
*CTL
[0 to 9999999/ 0 / 1]
These SPs count by color mode the total number of pages sent to a folder on a PC
(Scan-to-PC) with the Scan and LS applications.
8 675
S: Deliv PGS/PC
*CTL
[0 to 9999999/ 0 / 1]
These SPs count by color mode the total number of pages sent with Scan-to-PC with
the Scan application.
8 67x 1 B/W
8 67x 2 Color
8 681
T:PCFAX TXPGS
*CTL These SPs count the number of pages sent by PC Fax.
These SPs are provided for the Fax application only, so
the counts for SP8 681 and SP8 683 are the same.
[0 to 9999999/ 0 / 1]
8 683
F:PCFAX TXPGS
*CTL
• This counts pages sent from a PC using a PC fax application, from the PC through the copier to the
destination.
• When sending the same message to more than one place using broadcasting, the pages are only
counted once. (For example, a 10-page fax is sent to location A and location B. The counter goes
up by 10, not 20.)
8 691
T:TX PGS/LS
*CTL
These SPs count the number of pages sent from the
document server. The counter for the application that
was used to store the pages is incremented.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored from
within the document server mode screen at the operation
panel. Pages stored with the Store File button from within
the Copy mode screen go to the C: counter.
8 692
C:TX PGS/LS
*CTL
8 693
F:TX PGS/LS
*CTL
8 694
P:TX PGS/LS
*CTL
8 695
S:TX PGS/LS
*CTL
8 696
L:TX PGS/LS
*CTL
• Print jobs done with Web Image Monitor and Desk Top Binder are added to the count.
• If several documents are merged for sending, the number of pages stored are counted for the
application that stored them.
3. SP Mode Tables
366
Summary of Contents for AP-C3
