Ricoh AP-C3, Field Service Manual, Page: 619 / 1334

Main SP Tables-6
SP6-XXX (Peripherals)
6006 [ADF Adjustment]
Adjusts the side-to-side and leading registration of originals with the ARDF.
001 Side-to-Side Regist: Front
*ENG [-3.0 to 3.0 / 0 / 0.1 mm/step ]
002 Side-to-Side Regist: Rear
003 Leading Edge Registration *ENG [-5.0 to 5.0 / 0 / 0.1 mm/step ]
Adjusts the amount of paper buckle to correct original skew for the front and rear sides.
005 Buckle: Duplex Front
*ENG
[-3.0 to 3.0 / 0 / 0.1 mm/step ]
006 Buckle: Duplex Rear [-2.5 to 2.5 / 0 / 0.1 mm/step ]
Adjusts the erase margin at the original trailing edge.
007 Rear Edge Erase *ENG [-10 to 10 / 0 / 0.1 mm/step ]
6007
[ADF INPUT Check]
Displays the signals received from the sensors and switches of the ARDF. Only Bit 0 is used
for ADF input check ( p.711 in this section).
6008
[ADF OUTPUT Check]
Activates the electrical components for functional check.
It is not possible to activate more than one component at the same time ( p.711 in this
section).
6009
[ADF Free Run]
Performs a DF free run in simplex, duplex mode or stamp mode.
001 Free Run Simplex Motion *ENG
- 002 Free Run Duplex Motion *ENG
003 Free Run Stamp Motion *ENG
Main SP Tables-6
617