Ricoh AP-C3, Field Service Manual, Page: 868 / 1334

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
-01 Timeout error during the PM operation
-02 Working memory error
-03 Cannot start-up the filtering process
-04 Abnormal exit from the filtering process
An error is detected in the printer application program and operation cannot
continue.
• Defective software
• Unexpected hardware resource (e.g., memory shortage)
1. Software defective; turning on and off the main power switch
2. Insufficient memory; additional memory
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
921 B
Printer font error
A necessary font is not found when starting up the printer application.
• A necessary font is not found in the SD card.
1. Turn the main power switch off and on.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
925 B NetFile function error
-00 HDD is defective
-01 NetFile management file is broken
The NetFile file management on the HDD cannot be used, or a NetFile
management file is corrupted and operation cannot continue.
The HDDs are defective and they cannot be debugged or partitioned, so the
Scan Router functions (delivery of received faxes, document capture, etc.), Web
services, and other network functions cannot be used.
HDD status codes are displayed below the SC code.
1. Refer to the four procedures below (Recovery from SC 925).
6. Troubleshooting
866