Ricoh AP-C3, Field Service Manual, Page: 506 / 1334

003
AutoControl Prohibition
Set
*ENG
[0 or 1 / 0 / -]
0: Permit, 1: Forbid
Enables or disables the automatic process control prohibition.
004
Pre-ACC Process Control *ENG
[0 to 2 / 2 / 1/step]
0: Not Executed
1: Process Control
2: TC Control (TD Adjustment)
3: Not used
Selects the process control mode that is done before ACC.
005
Pattern Calculation
Method
*ENG
[0 to 2 / 2 / 1/step]
0: FIXED
1: INITIALIZED
2: CALCULATED
Selects the process control method.
3043 [TD Adjustment Mode]
001
Repeat Number: Power ON *ENG [0 to 9 / 4 / 1 time/step]
Specifies the maximum number of repeats of the toner density adjustment at power on.
0: Disabled, 1 to 3: Repeat number,
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
002
Repeat Number: Initialization *ENG [0 to 9 / 3 / 1 time/step]
Specifies the maximum number of repeats of the toner density adjustment at the developer
initialization.
0: Disabled, 1 to 3: Repeat number,
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
5. System Maintenance
504