Ricoh AP-C3, Field Service Manual, Page: 489 / 1334

2771
[Special 1: Leading Edge Correction] Special 1 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: High speed, 1200: Low speed
• The paper leading edge area can be adjusted with SP2772.
001 Paper Transfer: Plain: 1st Side *ENG [0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG [0 to 400 / 100 / 5%/step]
003 Paper Transfer: 1200: 1st Side *ENG [0 to 400 / 100 / 5%/step]
2771
Adjusts the correction to the discharge plate current at the paper leading edge in each
mode. SP2751 is multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2772.
005 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG [0 to 400 / 100 / 5%/step]
2772
[Special 1: Sw Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG [0 to 50 / 0 / 1 mm/step]
005 Separation DC: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step] 006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG
Main SP Tables-2
487