Ricoh AP-C3, Field Service Manual, Page: 150 / 1334

SSID Used to confirm the current SSID setting.
WEP Key Used to confirm the current WEP key setting.
WEP Mode
Used to show the maximum length of the string that can be
used for the WEP Key entry.
Bluetooth Interface Unit Type D
• Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at a time: (IEEE 802.11 a/g g (Wireless
LAN), Bluetooth).
• Do not remove the Bluetooth unit while the power of the machine is on.
1. Turn off the power of the machine, and then unplug the power cable from the wall outlet.
2. Insert the Bluetooth Interface adapter into the USB connector [A].
3. Plug the power cable and turn on the power of the machine.
4. Make sure that the machine can recognize the option (see ‘p.155’ at the end of this section).
• The Bluetooth interface unit and the Wireless LAN interface unit can not be used
simultaneously.
2. Installation
148