Ricoh AP-C3, Field Service Manual, Page: 1085 / 1334

2960 [Process Interval]
001
Additional Time *ENG [0 to 10 / 0 / 1 sec/step]
Adjusts the additional time for ending the machine's process.
2970 [Cleaning After JOB]
001
No Refresh *ENG
[0 to 100 / 33 / 1 /step]
0: No cleaning
Specifies the threshold sheets for the cleaning of the paper transfer roller without the
refresh mode.
002 Refresh *ENG
[0 or 1 / 1 / 1 /step]
0: No cleaning, 1: Cleaning
2971 T1 Non Image Area ON Timing
001
Standard Speed *ENG
[–300 to 260 / C3c: 10 / 10 msec/step]
[–240 to 240 / C3d: 30 / 10 msec/step]
Adjusts the timing for the non-image area bias of the image transfer roller.
002 Medium Speed *ENG [–400 to 290 / 0 / 10 msec/step]
003 Low Speed *ENG [–790 to 410 / 0 / 10 msec/step]
2972 B/W Image Request Timing
001 Standard Speed *ENG [0 to 4000 / 0 / 10 msec/step]
002 Medium Speed *ENG [0 to 4000 / 0 / 10 msec/step]
003 Low Speed *ENG [0 to 4000 / 0 / 10 msec/step]
2973 Forced Process Down Threshold
001 - *ENG [0 to 5000 / 0 / 10 page/step]
2974 OPC PreCharge Time Control
001 Standard Speed *ENG [0 to 1250 / 197 / 1 msec/step]
Main SP Tables-2
161