Ricoh AP-C3, Field Service Manual, Page: 523 / 1334

3517
[Blade damage prevention mode]
Adjusts the threshold temperature for preventing the cleaning blade in the transfer belt
cleaning unit from being damaged. If the temperature is above this value, toner is applied
to the transfer belt at set intervals during the job to prevent the blade from flipping over.
001 Execution Temp. Threshold *ENG [0 to 50 / 40 / 1°C/step]
3519
[Toner End Prohibition Setting]
Enables or disables each adjustment at toner near end.
001 Process Control *ENG [0 or 1 / 1 / 1/step]
0: Permit (adjustment is done even toner near
end condition)
1: Forbid (adjustment is not done at toner near
end condition)
002 MUSIC *ENG
003 TC Adj. *ENG
3520
[ITB Idling Number]
Specifies the number of the ITB idling rotation for each condition.
001 Temperature: H *ENG
[0 or 3 / 0 / 1 revolution/step]
002 Temperature: M *ENG
003 Temperature: L *ENG
004 Temperature: L: Power ON *ENG
3521
[Temperature Threshold]
Specifies the threshold temperature for each condition. These settings affect the conditions
of SP3-520.
t1: Threshold between L (low temp.) and M (medium temp.)
t2: Threshold between M (medium temp.) and H (high temps)
001 Threshold: t2 *ENG [20 or 30 / 25 / 1 deg/step]
002 Threshold: t1 *ENG [0 or 15 / 15 / 1 deg/step]
Main SP Tables-3
521