Ricoh AP-C3, Field Service Manual, Page: 438 / 1334

2112 [TM/ID Sensor Check] ID Sensor Check FA
001 Execute
[0 or 1 / 0 / 1 /step]
This SP is used to check the ID sensors at the
factory. The results of this SP are displayed in
SP2140 to SP2145.
2117
[Skew Adjustment]
Specifies a skew adjustment value for the skew motor M, C or Y.
These SPs must be used when a new laser optics housing unit is installed or when
SC2.585 occurs. For details, see "Laser Optics Housing Unit" in the "Replacement and
Adjustment" section.
001 Pulse: M *ENG
[–50 to 50 / 0 / 1 pulse/step] 002 Pulse: C *ENG
003 Pulse: Y *ENG
2118 [Skew Adjustment]
001 Execute: M *ENG Changes the current skew adjustment values to
the values specified with SP2117.
These SPs must be used when a new laser optics
housing unit is installed or when SC2.585
occurs. For details, see "Laser Optics Housing
Unit" in the "Replacement and Adjustment"
section.
002 Execute: C *ENG
003 Execute: Y *ENG
2119
[Skew Adjustment Display]
Displays the current skew adjustment value for each skew motor.
001 M *ENG
[–50 to 50 / - / 1 pulse/step] 002 C *ENG
003 Y *ENG
5. System Maintenance
436