Ricoh AP-C3, Field Service Manual, Page: 569 / 1334

5481
[Authentication Error Code]
These SP codes determine how the authentication failures are displayed.
001 System Log Disp *CTL
Determines whether an error code appears in the
system log after a user authentication failure
occurs.
[0 or 1/ 0 /1]
0: Off, 1: On
002 Panel Disp *CTL
Determines whether an error code appears on
the operation panel after a user authentication
failure occurs.
[0 or 1/ 1 /1]
1: On, 0: Off
5490 [MF KeyCard (Japan only)]
001 Job Permit Setting *CTL
Sets up operation of the machine with a keycard.
[0 to 1 / 0 / 1]
0: Disabled. Cancels operation without a user
code.
1: Enabled. Allows operation without a user
code.
002 Count Mode Setting *CTL -
5501 [PM Alarm] *CTL -
001 PM Alarm Level
[0 to 9999 / 0 / 1 /step]
0: Alarm off
1 to 9999: Alarm goes off when Value (1 to 9999) x
1000 > PM counter
002 Original Count Alarm
[0 or 1 / 0 / – ]
0: No alarm sounds
1: Alarm sounds after the number of originals passing
through the ARDF > 10,000
5504 [Jam Alarm] *CTL -
Main SP Tables-5
567