Ricoh AP-C3, Field Service Manual, Page: 528 / 1334

001 Plain: Bk *ENG
[0 to 200 / - / 1 %/step]
002 Plain: M *ENG
003 Plain: C *ENG
004 Plain: Y *ENG
005 Thick 1: Bk *ENG
[0 to 200 / - / 1 %/step]
006 Thick 1: M *ENG
007 Thick 1: C *ENG
008 Thick 1: Y *ENG
009 Thick 2 & FINE: Bk *ENG
[0 to 200 / - / 1 %/step]
010 Thick 2 & FINE: M *ENG
011 Thick 2 & FINE: C *ENG
012 Thick 2 & FINE: Y *ENG
3710
[HST Concentration Control: Set]
TD Sensor: Toner Concentration Control Setting
Selects the toner concentration control method by HST memory, which is in the TD sensor.
001 Control Method: Selection *ENG [0 or 1 / 1 / - ] 0: Not Use, 1: Use
3711
[HST Concentration Control: Bk]
Displays the factory settings of the black PCDU.
001 Vcnt *ENG [0 to 5 / - / 0.1 V/step]
002 Vt *ENG [0 to 5 / - / 0.1 V/step]
003 Sensitivity: HL *ENG [1.22 to 3.77 / - / 0.01 V/step]
004 Sensitivity: HM *ENG
[0 to 2.55 / - / 0.01 V/step]
005 Sensitivity: ML *ENG
006 Set Detection *ENG [0 to 5 / - / 0.1 V/step]
007 Without Developer *ENG [0 to 5 / - / 0.1 V/step]
5. System Maintenance
526