Ricoh AP-C3, Field Service Manual, Page: 500 / 1334

2907
[Acs Setting (FC to Bk)]
Adjusts the threshold for moving away the image transfer belt from the color PCDUs. This
SP moves the image transfer belt away from the color PCDUs when the number of B/W
image printouts reaches the number of sheets specified with this SP after consecutive full
color image printouts in the full color mode.
If this SP is set to "0", the image transfer belt does not move away.
001 Continuous Bk Pages *ENG [0 to 10 / 0 / 1 sheet/step]
2920 [Trans Mot Control]
001
0: Encorder 1 :FG *ENG [0 or 1 / 0 / 1 /step]
Selects the speed control mode for the ITB.
If SC443 occurs and machine does not recover, change this setting to "1".
002
SC443-00 Count *ENG [0 to 3 / 0 / 1 /step]
Displays the number of the ITB encodre error. SC443 is displayed if this counter counts to
"3".
2930
[SecondaryFB: Threshold] Paper Transfer Roller Feed-back: Threshold Adjustment
Adjusts the threshold between high resistance (division 1) and low resistance (division 2)
at the paper transfer roller. This SP affects SP2931 to SP2939.
001 Voltage *ENG [0 to 7000 / 6000 / 10 –V/step]
2960 [Process Interval]
001
Additional Time *ENG [0 to 10 / 0 / 1 sec/step]
Adjusts the additional time for ending the machine's process.
2970 [Cleaning After JOB]
001
No Refresh *ENG
[0 to 100 / 33 / 1 /step]
0: No cleaning
Specifies the threshold sheets for the cleaning of the paper transfer roller without the
refresh mode.
5. System Maintenance
498