Ricoh AP-C3, Field Service Manual, Page: 1189 / 1334

041
Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a basic
machine that previously had no HDD. The first time the machine is powered on with the
new HDD installed, the system automatically takes the address book from the NVRAM
and writes it onto the new HDD. However, the new address book on the HDD can be
accessed only by the system administrator at this stage. Executing this SP by the service
technician immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
5. However, at this point the address book can be accessed by only the system
administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes successfully, any user
can access the address book.
043 Addr Book Media
Displays the slot number where an address book data is
in.
[0 to 30 / - /1]
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
20: HDD
30: Nothing
047 Initialize Local Addr Book
Clears the local address book information, including the
user code.
048
Initialize Delivery Addr
Book Clears the distribution address book information, except
the user code.
049 Initialize LDAP Addr Book
Clears the LDAP address book information, except the
user code.
050 Initialize All Addr Book
Clears all directory information managed by UCS,
including all user codes.
Main SP Tables-5
265