Ricoh AP-C3, Field Service Manual, Page: 1109 / 1334

3522
[Initial Process Control Set]
Adjusts the threshold for the process control at power on.
When the current condition has changed by more than the values of these SPs when
compared with the conditions at the previous operation, the process control at power on is
executed.
002 Non-use Time Setting *ENG [0 to 1440 / 360 / 1 minute/step]
003 Temperature Range *ENG [0 to 99 / 10 / 1°C/step]
004 Relative Humidity Range *ENG [0 to 99 / 50 / 1 %RH/step]
005 Absolute Humidity Range *ENG [0 to 99 / 6 / 1 g/m
3
/step]
006 AIT Temperature Range *ENG [0 to 99 / 25 / 1°C/step]
007 Vtref Temperature Range *ENG [0 to 99 / 20 / 1°C/step]
100
[Rapi_timer]
Time Setting *ENG [0 to 255 / 30 / 1 sec/step]
Adjusts the time-out time for the Rapi timer.
3531
[Non-use Time Process Control Set]
Adjusts the threshold for the process control at stand-by.
When the current condition has changed by more than the values of these SPs when
compared with the conditions at the previous operation, the process control at stand-by is
executed.
001 Non-use Time Setting *ENG [0 to 1440 / 360 / 1 minute/step]
002 Temperature Range *ENG [0 to 99 / 10 / 1°C/step]
003 Relative Humidity Range *ENG [0 to 99 / 50 / 1 %RH/step]
004 Absolute Humidity Range *ENG [0 to 99 / 6 / 1 g/m
3
/step]
005 Maximum Execution Number *ENG
Adjusts the maximum execution time for the
process control at stand-by.
[0 to 99 / 10 / 1 time/step]
3611 [Development Gamma: Display/Set]
Main SP Tables-3
185