
• If several jobs are combined for sending to the Scan Router, Scan-to-Email, or Scan-to-PC, or if
one job is sent to more than one destination. each send is counted separately. For example, if the
same document is sent by Scan-to-Email as well as Scan-to-PC, then it is counted twice (once for
Scan-to-Email and once for Scan-to-PC).
8 141
T:Deliv Jobs/Svr
*CTL [0 to 9999999/ 0 / 1]
These SPs count the total number of jobs (color or black-and-white) scanned and sent
to a Scan Router server.
8 145
S: Deliv Jobs/Svr
*CTL [0 to 9999999/ 0 / 1]
These SPs count the number of jobs (color or black-and-white) scanned in scanner
mode and sent to a Scan Router server.
8 14x 1 B/W
8 14x 2 Color
8 14x 3 ACS
• These counters count jobs, not pages.
• The jobs are counted even though the arrival and reception of the jobs at the Scan Router server
cannot be confirmed.
• If even one color image is mixed with black-and-white images, then the job is counted as a "Color"
job.
• If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be
delivered, the job is not counted.
• If the job is cancelled during sending, it may or may not be counted, depending on what stage of
the process had been reached when the job was cancelled.
• Even if several files are combined for sending, the transmission counts as one job.
8 151
T:Deliv Jobs/PC
*CTL
[0 to 9999999/ 0 / 1]
These SPs count the total number of jobs (color or black-and-white) scanned and sent
to a folder on a PC (Scan-to-PC).
Note: At the present time, 8 151 and 8 155 perform identical counts.
8 155
S:Deliv Jobs/PC
*CTL
[0 to 9999999/ 0 / 1]
These SPs count the total number of jobs (color or black-and-white) scanned and sent
with Scan-to-PC.
Main SP Tables-8
677
Summary of Contents for AP-C3
