Ricoh AP-C3, Field Service Manual, Page: 1132 / 1334

001 Factory Setting: B Color *ENG [0 to 7 / - / 1 digit/step]
4680
[Digital Gain Adjust]
Displays the gain value of the amplifiers on the controller for Red.
001 Factory Setting: RE Color *ENG
[0 to 1023 / - / 1 digit/step]
002 Factory Setting: RO Color *ENG
4681
[Digital Gain Adjust]
Displays the gain value of the amplifiers on the controller for Green.
001 Factory Setting: GE Color *ENG
[0 to 1023 / - / 1 digit/step]
002 Factory Setting: GO Color *ENG
4682
[Digital Gain Adjust]
Displays the gain value of the amplifiers on the controller for Blue.
001 Factory Setting: BE Color *ENG
[0 to 1023 / - / 1 digit/step]
002 Factory Setting: BO Color *ENG
4688
[Scan Image Density Adjustment]
Adjusts the white shading parameter when scanning an image with the ARDF or 1-pass
DF.
Adjusts the density level if the ID of outputs made in the DF and Platen mode is different.
001 ARDF *ENG [80 to 120 / 98 / 1%/ step]
002 1-pass DF *ENG [80 to 120 / 98 / 1%/ step]
4690
[White Level Peak Read]
Displays the peak level of the white level scanning.
If these scanned white levels are out of the correct range, SC142 may be issued.
001 RE *ENG
[0 to 1023 / - / 1 digit/step]
002 RO *ENG
3. SP Mode Tables
208