manualshive.com logo in svg

Ricoh AP-C3, Field Service Manual, Page: 1221 / 1334

Share
Download
Ricoh AP-C3 Field Service Manual Download Page 1221

013 Image Transfer Belt

[0 or 1 / 1 / -]
0: Not PM maintenance
1: PM maintenance

014 Image Transfer Cleaning Unit

015 Fusing Unit

016 Paper Transfer Roller Unit

017 Waste Toner bottle

018 Fusing Roller

019 Pressure Roller

7801

[ROM No/ Firmware Version]

002 Engine

*CTL

Displays all versions and ROM numbers in the
machine.

7803

[PM Counter Display] (Page, Unit, [Color])

Displays the number of sheets printed for each current maintenance unit.
PM counters click up based on the number of A4 (LT) LEF size sheets printed. Therefore,
the A3 (DLT) Double Count is activated. The Double Count cannot be deactivated.
When a unit is replaced, the machine automatically detects that the new unit is installed.
Then, the current PM counter value is automatically moved to the PM Counter - Previous
(SP7-906-1 to 10) and is reset to “0”.
The total number of sheets printed with the last unit replaced can be checked with
SP7-906-1 to 10.
NOTE: The LCT is counted as the 3rd feed station.

001 Paper

*CTL

-

Main SP Tables-7

297

Summary of Contents for AP-C3























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments