
147
Active IPv6 Stateless
Address 1
These SPs are the IPv6 status addresses (1 to 5) referenced
on the Ethernet or wireless LAN (802.11b) in the format:
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each.
149
Active IPv6 Stateless
Address 2
151
Active IPv6 Stateless
Address 3
153
Active IPv6 Stateless
Address 4
155
Active IPv6 Stateless
Address 5
156 IPv6 Manual Address
This SP is the IPv6 manually set address referenced on the
Ethernet or wireless LAN (802.11b) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in 8
blocks of 16 bits each.
158 IPv6 Gateway Address
This SP is the IPv6 gateway address referenced on the
Ethernet or wireless LAN (802.11b). The IPv6 address
consists of a total 128 bits configured in 8 blocks of 16 bits
each.
161
IPv6 Stateless Auto
Setting
Enables or disables the automatic setting for IPv6 stateless.
[0 or 1 / 1 / 1 /step]
0: Disable, 1: Enable
236 Web Item visible
Displays or does not display the Web system items.
[0 x 0000 to 0 x ffff / 0 x ffff] 0: Not displayed, 1:
Displayed
bit0: Net RICOH
bit1: Consumable Supplier
bit2-15: Reserved (all)
237
Web shopping link
visible
Displays or does not display the link to Net RICOH on the
top page and link page of the web system.
[0 to 1 / 1 / 1]
0: Not display, 1:Display
Main SP Tables-5
253
Summary of Contents for AP-C3
