Ricoh AP-C3, Field Service Manual, Page: 1022 / 1334

016 Lead Edge Width: Thin *ENG
[0 to 9.9 / 4.2 / 0.1 mm/step]
017 Trail. Edge Width: Thin *ENG
018 Duplex Trail. L Size: Thin *ENG [0 to 4 / 1 / 0.1 mm/step]
019 Duplex Trail. M Size: Thin *ENG [0 to 4 / 0.8 / 0.1 mm/step]
020 Duplex Trail. S Size: Thin *ENG [0 to 4 / 0.6 / 0.1 mm/step]
2105
[LD Power Adj.] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
001 High Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner on
the output.
Increasing a value makes lines thicker on the
output.
002 High Speed: Ma *ENG
003 High Speed: Cy *ENG
004 High Speed: Ye *ENG
005 Middle Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner on
the output.
Increasing a value makes lines thicker on the
output.
006 Middle Speed: Ma *ENG
007 Middle Speed: Cy *ENG
008 Middle Speed: Ye *ENG
009 Low Speed: Bk *ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner on
the output.
Increasing a value makes lines thicker on the
output.
010 Low Speed: Ma *ENG
011 Low Speed: Cy *ENG
012 Low Speed: Ye *ENG
2109
[Test Pattern]
Generates the test pattern using "COPY Window" tab in the LCD.
003 Pattern Selection - [0 to 23 / 0 / 1/step]
3. SP Mode Tables
98