Ricoh AP-C3, Field Service Manual, Page: 616 / 1334

5985
[Device Setting]
The NIC and USB support features are built into the GW controller. Use this SP to enable
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
001 On Board NIC
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is limited
only for the NRS or LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT
authentication are not available when this SP is set to "2".
Even though you can change the initial settings of those
network applications, the settings do not work.
002 On Board USB
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5987 [Mech. Counter]
001 0: OFF / 1: ON *ENG
This SP detects that a mechanical counter device is
removed. If it is detected, SC610 occurs.
5990
[SP print mode]
Prints out the SMC sheets.
5. System Maintenance
614