Ricoh AP-C3, Field Service Manual, Page: 559 / 1334

5121
[Counter Up Timing]
This program specifies when the counter goes up. The settings refer to “paper feed” and
“paper exit” respectively.
001 0:Feed 1:Exit *CTL [0: Feed/ 1: Exit]
5126
[F Size Original Setting]
Selects F size original setting.
001 - *ENG
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)
5127
[APS Mode]
This program disables the APS.
001 - *CTL [0: Not disabled/ 1: Disabled]
5131
[Paper Size Type Selection]
The program selects a paper size system from the following alternatives: the AB system
(0), the LT system (1), and the AF system (2).
001 - *ENG [0: JP (Japan)/ 1: NA / 2: EU]
5148 Size Detection Off *CTL [0: OFF/ 1: ON]
0: Detect
1: Not Detect
5150
[Bypass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
Normally the paper length for sub scanning paper from the by-pass tray is limited to 600
mm, but this can be extended with this SP to 1260 mm.
001 0: OFF 1: ON *CTL [0: OFF/ 1: ON]
Main SP Tables-5
557