Radiodetection 6100-Gfast, Operation Manual

Page: 152 / 213

6100-Gfast Multifunction Network Analyzer Operation Manual
152 © 2020 Radiodetection Ltd
Multimeter 1 Result on page 147 ,
Multimeter 2 Result on page 147 ,
Noise Result on page 148 ,
Noise Result Graph on page 148 , and
Frequency Result on page 149
for more information.
Summary
The Result Details Summary page displays the
overall pass/fail status of all tests selected for auto
testing. This page varies slightly from the run
User
Auto Test page in that there are no configurable
parameters.

Test Group is the overall test group of the
selected saved results file, for example Auto
Test .

Test Identification is the test type of the
group, for example User Auto Test .

Cable Setup button opens a new page that
allows you to view the parameters of the cable
used in the Auto Test. Press to open the
page.
Cable Setup
The Cable Setup page displays read-only parameters
of the cable used in the Auto Test .

Cable Type displays the ID, Cable Name and
Fill, (with its associated parameters) from the
current Cable Book, used for testing.

Cable Fill Material is the type of material the
cable is filled with: Aircore, Jelly, Pulp, 5 PR ,
or 2 PR .

Velocity of Propagation is the velocity of
propagation for the cable.

Cable Temperature is the temperature of the
cable under test in either °F or °C .
15.5 Profile Details
Profile Details contains the details of the Test
Selection settings for User Auto Test . If FED is
Enabled on FED Setup page, Pause is replaced by
FED States parameters and will show the FED state
for each test.

Test Parameters button opens a new page
displaying read-only parameter details of all
tests.

Test Thresholds button opens new pages
displaying read-only threshold values for all
tests.