Radiodetection 6100-Gfast Operation Manual Download Page 196

Page: 196 / 213

6100-Gfast Multifunction Network Analyzer Operation Manual

196

connection (Wi-Fi or Ethernet) as shown by the
corresponding icon in the top right-hand corner of the
navigation bar.



Upload Location

FTP

USB



Upload Results Location

allows you to

upload saved

DSL/Ethernet

Copper

result

files. DSL and Ethernet result files are at the
same location.



Select Files

is either

None

which removes all

check marks allowing you to select one or
more files, or

All



Uploaded

status column displays a successful,

failed, or no upload for each file.



Upload

button transfers the selected files to

the designated location.



Delete

button removes selected XML files from

the internal memory.

Note:

For

Auto Test

, if you have enabled the

Web

Browser

, wait for the browser test to start, and

then exit the browser to upload files. Alternately,
wait for files to complete uploading before
pressing any keys.

To upload previously saved results:

1. Press the left/right arrow keys to highlight the

desired

Upload Location

2. Press

to display the list and select the

value.

3. Press the down arrow key and select either

None

All

files.

4. If

None

, press the down arrow key to highlight

the list box and press

to open the list.

5. In the list, press the up/down arrows to select

the desired files.

6. Press

to come out of the list.

7. Press the down arrow key to highlight either

Upload

Delete

and Press

18.2 Managing Results

You can view,

Upload

Export

, and

Delete

any of your

saved results with the 6100-Gfast by highlighting the

Result Manager

icon from the

DSL Main

pane and

pressing

Read Results

The

Result

page allows you to select a

File Name

and

view  the  results  of  files  previously  saved.  The  page
lists  all  saved  result  files  by  test  date  and  time.  The
format  of

Test Date Time

is per the selection in

System Settings

. Result files can be loaded from

either the

6100 internal memory

or a

USB

To open previously saved test results:

1. Press the left/right arrow keys to highlight the

desired parameter.

2. Press

to display the list or select the

value.

Summary of Contents for 6100-Gfast






















































































































































































































Search results

Summary of Contents for 6100-Gfast

Reviews:

Related manuals for 6100-Gfast

Brands by name

Popular brands

Radiodetection 6100-Gfast, Operation Manual

Search results

Summary of Contents for 6100-Gfast

Reviews:

Related manuals for 6100-Gfast

Brands by name

Popular brands