6100-Gfast Multifunction Network Analyzer Operation Manual
48
© 2020 Radiodetection Ltd
Frequency
The
Frequency
tab lists the default
FED States
set for
frequency tests and allows you to set the values for the
following:
VF/AC Balance
WB Balance
Return Loss
Default values are displayed for
WB Attenuation
,
RX
Tone with FED
, and
Load Coils
.
The
Terminated
FED state appends the required
resistance value. For example, if you select
Terminated (600 Ω) 5
, the
Termination Resistance
will be 600 ohms.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options and press the up/down arrow keys to
highlight the desired parameter.
4. Press
to confirm the value.
Other
The
Other
tab displays the default
FED States
set for
all other tests. The
FED States
are listed for the
following tests:
xTalk TDR
RFL Single/Separate Good Pair/K-Test
Pair Detective
You can set the default values for the following:
Auto/Manual TDR
FaultMapper
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options and press the up/down arrow keys to
highlight the desired parameter.
4. Press
to confirm the value.
