6100-Gfast Multifunction Copper Tester Operation Manual
© 2020 Radiodetection Ltd
83
Cable Temperature
allows you to change the
temperature of the cable under test in either
°F
or
°C
.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
TDR
The FaultMapper
TDR
function provides a shortcut to
the TDR test. A dialogue box opens, warning that you
are about to leave the
FaultMapper
test. TDR results
captured while running FaultMapper will be available
upon loading TDR. Please go to
information on this test.
FaultMapper Result Details
The
Result Details
read-only page displays the test
results in text and graphical format.
Test Identification
is the name of the test, for
example
FaultMapper
.
Cable Setup
button opens a new page
displaying the cable parameters of the test.
Use the left/right arrows to select the button
and press
to open the page.
Result
displays the cable fault details.
Note: When running FaultMapper with a strap at the far
end of the pair, and there is a T-G/A-E fault, the
strap may also cause FaultMapper to display a
R-G/B-E short. In such cases, the resistance
shown is the resistance that would be measured
using a multimeter.
Estimated Length
displays the cable length
when the cable is open.
Fault Status
displays the number of faults
detected (or
No fault detected
) after running
the test.
Result Details Cable Setup
The
Cable Setup
page in the
Result Details
allows
you to view the
Cable Parameters
set for the
FaultMapper
test.
