6100-Gfast Multifunction Network Analyzer Operation Manual
194
© 2020 Radiodetection Ltd
Saving,
Reading, and
Managing DSL/IP Test
Results
18.1 Saving Results
You can save a snapshot of test results into a result
file during or after performing a DSL/IP test, with the
6100-Gfast. Each Auto Test, Manual, and Ethernet
test includes an
Upload/Save Result
tab to do so.
The tab allows you to
Upload & Save
your test
on page 19) using the
following:
out-band upload method if not disabled and the
test is stopped
existing in-band method if enabled, using the
DSL or Ethernet connection made during the
test, and the test is running.
Or you can
Save
your results to an internal memory
file or
Export
results to an HTML, MHTML, or XML
report using a USB key.
Alternatively, when a test is completed or stopped
and you press
,
Confirm Save Results
dialogue
box pops up. Selecting
Yes
displays the
Upload/Save Result
screen where the following
information can be entered:
Identification Fields
o
User Name
/
User ID
display the values
set up in the
Setup
/
Application
Settings
/
Identification
tab. You can
edit this field using the editor screen.
o
Contractor Name
allows you to enter
the name of a contractor used to
perform the tests.
o
Test From
/
To
display the values set
up in the
Setup
/
Application
Settings
/
Identification
tab. You can
edit this field using the choices from
the list box.
o
Job ID
allows you to create/edit a
unique identifier for the task.
o
Customer Name
is the name of the
customer for which the test was run.
o
Circuit ID
allows you to create/edit a
unique identifier for the circuit under
test.
o
Comments
allows you to add any
relevant information.
Save Result
o
Select Result File
button displays a
list of existing file names where you
can save your results.
o
Result File Storage Location
gives
you the option of storing results either
in the
6100 internal memory
or
USB
device. The default selection comes
from
Setup
/
Application
Settings
/
General
tab.
o
Result File Name
allows you to
preview and edit the result file name.
The proposed file name is based on
current auto-naming parameters
configured in
Setup
/
Application
Settings
/
File Name
.
o
Out-Band Upload & Save
button is
enabled when test is stopped and out-
band upload method is not disabled in
System Settings
/
Upload Setup
.
o
Save
button confirms if the
Result File
Name
is saved successfully.
Export Report
o
Report File Storage Location
USB
automatically.
o
Report Format is 6100, HTML,
MHTML
, or
XML
.
You can generate and export HTML,
MHTML, or XML reports from any
saved test result.
