6100-Gfast Multifunction Copper Tester Operation Manual
© 2020 Radiodetection Ltd
33
last dialed lists, without exiting the current test
application.
To access the Dialer function:
1. On the
Home
pane use the up/down arrow
keys to highlight
Copper Test
, then press
.
2. From the
Copper Main
or
Multimeter
(if FED
option enabled) page select
Dialer
and
press
.
Dialer
Dialer
provides the following functions:
The means to call and signal voice switch test
functions, such as drop battery, quiet line, and
more.
It is integrated with
POTS Auto Test
and other
manual test screens for easy access to the
switch functions during those tests. For
example, when testing for load coils, you can
remove the line battery and use the dialer
function to signal the switch to drop battery,
and then run the load coil test.
It is DTMF and can also be used to control a
DTMF FED (Far End Device) by entering
specific FED DTMF commands.
Allows you to use the unit as a telephone (with
the built-in speaker or external headset and the
on-screen phone keypad as a dialer) when
Enter Number
is invoked, whether in the test
results screens or through the separate
dedicated
Dialer
application.
The following parameters can be accessed from this
page:
Dialing Status
shows the current status of the
dialed number.
Group ID
displays the group ID number of the
dialed number if it was selected from the
Phone Book
.
Entry ID
displays the
Entry Name
of the dialed
number if it was selected from the
Phone
Book
.
Enter Number
displays the telephone number
entered, or selected from the
Recent Dialed
Numbers
list or
Phone Book
.
Recent Dialed Numbers
button opens a list of
recently dialed numbers for selection.
Select From Phone Book
button allows you to
select a number from the
Phone Book.
Function Keys:
o
Dial/Hang Up
allows you to dial the
selected or entered number, and hang
up the dialer.
o
Add To Phone Book
saves the
entered number to the
Phone Book
.
o
Mute/Unmute Speaker
changes the
speaker status.
o
Volume
adjusts the volume level.
