Radiodetection 6100-Gfast, Operation Manual

Page: 100 / 213

6100-Gfast Multifunction Network Analyzer Operation Manual
100 © 2020 Radiodetection Ltd
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press on a value to open a list box of
options.
4. Press to confirm the value.
Spectrum Threshold Settings
The Threshold Settings page allows you to set the
Crosstalk threshold values at fixed and periodic
frequencies.

Type is the threshold limit: either Maximum or
Minimum .

Enabled is a flag to use the existing threshold:
either Yes or No . For example, setting the
threshold Enabled to No will disable pass/fail
threshold.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press to confirm the value.
Spectrum Result Details
The Spectrum Results Details read-only page
displays the pass/fail status and test results in graphical
format.

Test Group is the overall test group of the
selected saved results file, for example Noise
Tests .

Test Identification is the test type of the
group, for example NEXT .

Test Modes is the mode of test, for example
Spectrum .

Select Graph button opens a new selection of
function keys which allow you to maneuver the
graph as follows:
o
Cursor - press the left/right arrow keys
to decrease/increase the values by
moving the cursor. Press and hold the
left/right arrow keys to accelerate the
cursor. Press to recall the cursor
and place it in the middle of the current
x-axis limits.
o
Zoom references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.