6100-Gfast Multifunction Network Analyzer Operation Manual
174
© 2020 Radiodetection Ltd
File Name
The
File Name
tab sets up the standard configuration
for automatically naming a result file. You can only
Enable
/
Disable
the entries. All enabled entries are
considered for file name generation.
File Name Preview
displays a preview of the
file name. The actual values of the enabled
entries are not shown.
Date and Time
value format depends on the
format selected in
System Settings
. This entry
cannot be disabled.
Separator
allows you to choose a value to
separate the enabled entries in the file name,
e.g.:
Space ( )
,
Dash (-)
,
Underscore (_)
.
To select an entry and choose a value:
1. Press the up/down arrow keys to highlight the
desired entry.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options.
4. Press the up/down arrow keys to select the
option and press
to confirm your selection.
Change Order
Change Order
page allows you to change the order of
the entries in the file name.
To change the order:
1. Press
to get into the list.
2. Use the up/down arrow keys to select the
desired entry.
3. Press
to come out of the list.
4. Press the up or down arrow key to activate the
Up/Down
buttons.
5. Using the left/right arrow keys, select
Up/Down
and press
to move
the entry up/down the list.
6. Press
to go back to the
File Name
tab.
The
File Name Preview
will be updated with
your changes.
