6100-Gfast Multifunction Network Analyzer Operation Manual
116
© 2020 Radiodetection Ltd
o
Cable Temperature
allows you to
change the temperature of the cable
under test in either
°F
or
°C
.
Select Graph
button changes to
Graph
Selected
when pressed and opens a new
selection of function keys which allow you to
maneuver the graph as follows:
o
Cursor
- press the left/right arrow keys
to decrease/increase the values by
moving the cursor. Press and hold the
left/right arrow keys to accelerate the
cursor. Press
to recall the cursor
and place it in the middle of the current
x-axis limits.
o
Zoom
references the middle of the x/y
axis and not the cursor position. Press
the arrow keys as follows:
Right = x-axis zoom in.
Left = x-axis zoom out.
Up = y-axis zoom in.
Down = y-axis zoom out.
o
Pan
- use left/right arrow keys to pan
the x-axis and the up/down arrow keys
to pan the y-axis.
o
1:1
resets the x-axis and y-axis limits
to full scale.
o
Return To Test
removes these
function keys and displays the
Detection
page.
Result
displays the number of load coils in text
and graphical format.
Test Status
displays the current state of
measurement or an error message.
To select the parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
TDR
The Load Coils
TDR
function provides a shortcut to the
TDR test. A dialog box opens, warning that you are
about to leave the Load Coils test. TDR results
captured while running Load Coils will be available
upon loading TDR. Please go to
on page 124 for
information on this test.
Load Coils Result Details
The
Results Details
read-only page displays the
number of load coils, in text and graphical format. You
can maneuver the graph as follows:
Cursor
- press the left/right arrow keys to
decrease/increase the values by moving the
cursor. Press and hold the left/right arrow keys
to accelerate the cursor. Press to recall the
