6100-Gfast Multifunction Network Analyzer Operation Manual
98
© 2020 Radiodetection Ltd
To select the Spot parameter values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
Spot Threshold Settings
The
Threshold Settings
page allows you to set the
threshold values for the
NEXT Spot
test.
Type
is the threshold limit: either
Maximum
or
Minimum
.
Enabled
is a flag to use the current threshold:
either
Yes
or
No
.
To set threshold values:
1. Press the up/down arrow keys to highlight the
desired parameter.
2. Press the left/right arrow keys to view and
select the options.
OR
3. Press
on a value to open a list box of
options or the alphanumeric editor screen and
use the navigation keys to scroll through.
4. Press
to confirm the value.
Spot Result Details
The
Spot Results Details
read-only page displays the
saved pass/fail status,
NEXT
and
Frequency (TX)
values.
Spectrum
Spectrum
is a snapshot mode of operation similar to
WB Attenuation
. The test makes one measurement of
the crosstalk for the selected bandwidth, and then
stops.
Current Group
is the current test group name,
for example
Noise Tests
.
Current Test
displays the test being
measured. Here you can switch to another
Noise test from the given list. However, this
action will terminate the ongoing measurement
test.
