![background image](http://html1.mh-extra.com/html/quantum/snc-4000/snc-4000_user-manual_4004472157.webp)
SNC 4000 User’s Guide
151
Warranty and EULA
ADIC Limited Product Warranty
1
Subject to the limitations set forth below, ADIC warrants to Buyer as follows:
a. For 3 years from the date of delivery to Buyer, all hardware products manufactured by ADIC
(hereafter Products), excluding drives and media manufactured by third parties, which are
covered by paragraph (c) below, will be capable of performing substantially in accordance with
the applicable specifications for such Products stated in documentation supplied by ADIC;
All hardware repairs made by ADIC will be free from defects in material and workmanship for
the greater of the original warranty period or 3 months from the date such repairs are made; and
With respect to drives, tapes, and software manufactured by a third party, which are supplied
by ADIC, Buyer will be the beneficiary of the manufacturer’s warranties, if any, SUBJECT TO
THE LIMITATIONS STATED THEREIN. Copies of such manufacturer’s warranties will be
made available to Buyer upon request. ADIC DISCLAIMS AND EXCLUDES ALL
WARRANTIES WITH RESPECT TO SUCH ITEMS.
2
The foregoing warranties will be voided if the Products are not properly installed, serviced, used, or
maintained according to ADIC’s printed instructions or if the Products have been damaged or modified
after delivery. Buyer assumes responsibility for the selection of the Products for the uses for which they
are purchased.
3
If a defect is found and reported to ADIC in writing within the warranty period, ADIC will, in its sole
discretion and as its sole responsibility and liability and as BUYER’S SOLE AND EXCLUSIVE REMEDY
for breach of warranty, either repair or replace the nonconforming Product or accept the return thereof
and refund to Buyer the price paid to ADIC for such nonconforming Product. ADIC will respond to
Buyer’s request for return material authorization within 72 hours of Buyer’s notice. All warranty repair
work or inspections must be performed at an ADIC facility designated by ADIC. Shipment to ADIC’s
facility and all risk of loss or damage during shipment shall be borne by, or for the account of, Buyer.
4
ADIC will indemnify Buyer for any damages and costs finally awarded against Buyer on the grounds
that the Products, in the form and condition delivered by ADIC to Buyer hereunder, infringe on any valid
United States patents or copyrights of any third party, provided that Buyer notifies ADIC in writing of any
such claim within 10 days after learning thereof and that Buyer gives ADIC full control over the defense
and settlement of the claim and fully cooperates with ADIC with respect thereto. If any such claim is
brought or is likely to be brought, ADIC may at its option replace or modify the Products to make them
non-infringing, or refund to Buyer, upon the return of the Products at issue, the price paid therefore, less
20% for each year which has passed since the date of delivery hereunder. Buyer must discontinue all
use of any portion of the Products that has been replaced or modified or for which such a refund has
been tendered. ADIC’s obligation hereunder will not apply to any claim based on ADIC’s following
Summary of Contents for SNC 4000
