SNC 4000 User’s Guide
149
Startup Message Reference
After the SNC 4000 completes its power-on self-test, it will attempt to find, load, and run the real-time
licensed internal code (LIC) boot loader.
Bootrom Messages
See the sample code below.
Press any key to stop auto-boot...
0
auto-booting...
boot device : ibmEmac
unit number : 0
processor number : 0
file name : //ffs/vxWorks.st
inet on ethernet (e) : 192.168.1.183
flags (f) : 0x8
target name (tn) : SN600030
startup script (s) : //ffs/sna.rc
Attaching to TFFS... done.
Loading /ffs/vxWorks.st...2697865
Done
Starting at 0x10000...
LIC Initialization Messages
After the BootLoader finds and loads the LIC, the BootLoader will transfer control and start SNC 4000
operations. See the sample code below.
Host Name: bootHost
User: buckhorn
Attached TCP/IP interface to ibmEmac unit 0
Attaching network interface lo0... done.
NFS client support not included.
Adding 8123 symbols for standalone.
SDRAM DIMM: 128 Meg - 1 banks detected
Enabling MMU Data Translation
Summary of Contents for SNC 4000
