Quantum SNC 4000, User Manual

Page: 76 / 164

70 Service Port Command Reference
fcShowDevs Display SCSI and FC Target Devices from FC port
perspective 84
scsiAltIdGet Display SCSI Alternate IDs 103
scsiAltIdSet Change SCSI Alternate IDs 103
scsiHostChanGet Display SCSI Host Channel Modes 104
scsiHostChanSet Set SCSI Host Channel Modes 104
scsiHostIdGet Display SCSI Host ID Numbers 104
scsiHostIdSet Set SCSI Host ID Numbers 105
scsiRescan Rescan for devices on one or all SCSI Channels 105
scsiResetDisableGet Display SCSI Bus Reset on Power-Up Setting 105
scsiResetDisableSet Set the SCSI Bus Reset on Power-Up Setting 105
scsiShow Display SCSI Channels and attached devices 106
scsiTermGet Display termination status information for SCSI
Channels 107
targets Display attached SCSI and FC Target devices 120
Startup
diagBoot Shutdown and restart in Diagnostic mode 137
normalBoot Shutdown and restart in Normal mode 100
reset Restart without shutdown 101
reboot Shutdown and restart 100
Time and Date
date Display the date and time 73
dateSetFromRTC Set the Real Time Clock as the source of date
display 73
hostShow Display the IP address of the system timeserver 89
rdate Set a remote system as the source of date display 100
rtcDateSet Manually set the Real Time Clock 102
rtcSetCurrent Synchronize the Real Time Clock with the
timeserver 102
setNettime Enable or disable timeserver functionality 108
setTimeHost Add a host running timeserver to the system 109
tzSet Set the time zone offset from Greenwich Mean
Time 122
Table 7 Commands Listed Alphabetically by Function
Command or Command
Group
Description Page