Quantum SNC 4000, User Manual

Page: 135 / 164

SNC 4000 User’s Guide 129
vpsHostInbandAccessSet 1,[setting]
The
vpsHostInbandAccessSet
command sets the default access level for in-band API commands for a
particular host. After you have made the setting, check the results with vpsHostInbandAccessGet
[hostIndex],1 .
The default access level is 5, self-read and self-write access only.
SNC > vpsHostInbandAccessSet 1,7
value = 0 = 0x0
SNC > vpsHostInbandAccessGet 1,1
Read Access:
Self: 1, 3rd Party: 1
Write Access:
Self: 1, 3rd Party: 0
value = 7 = 0x7
To view the in-band access level for a particular host, use the vpsHostInbandAccessGet [hostIndex],1
command.
vpsHostShow [hostIndex]
The
vpsHostShow
command displays all known VPS or eVPS information for the specified host connection
index. The LUN access map is displayed as 16 rows of 16 bytes, one byte for each LUN.
The following command example shows VPS or eVPS information for host ID 1.
SNC > vpsHostShow 1
Host(1):
Value Meaning
1 Self-read
2 3rd-Party read
3 Self-read + 3rd-Party read
4 Self-write
5 Self-read + Self-write
7 Self-read + 3rd-Party read + Self-write
8 3rd Party write
10 3rd-Party read + 3rd-Party write
11 3rd-Party read + 3rd-Party write + Self-read
14 3rd-Party read + 3rd-Party write + Self-write
15 Self-read + 3rd-Party read + Self-write + 3rd Party write
Parameter Value Meaning
hostIndex is the Id obtained from the
sfmShow
command.
[LUN] 00 in the LUN Access map indicates the host has no
access to the LUN.
01 in the LUN Access map indicates the host has
access to the LUN.