![background image](http://html1.mh-extra.com/html/quantum/snc-4000/snc-4000_user-manual_4004472086.webp)
80
Service Port Command Reference
fcFibreSpeedSet [port],[speed]
The
fcFibreSpeedSet
command sets the FC port speed to 1 Gb/sec or 2 Gb/sec for the FC port. The
port can also be set to autorange, as in the example below.
SNC4000 > fcFibreSpeedSet 1,0
value = 0 = 0x0
fcGbicShow [port]
The
fcGbicShow
command displays the SFP information for each installed SFP. Specifying the port
number is optional.
SNC4000 > fcGbicShow
---------------------------------------------------------------
Ctlr : Module : Module
ID : Code : Information
---------------------------------------------------------------
1 : 4 : Serial Module Definition Protocol
: Connector Type --------------- SC
: Nominal Speed ---------------- 2.5 Gb/sec
: Link length for 9/125 um ----- 0 meters
: Link length for 50/125 um ---- 5500 meters
: Link length for 62.5/125 um -- 2700 meters
: Vendor Name ------------------ FINISAR CORP.
: Vendor OUI ------------------- 009065
: Vendor Part Number ----------- FTR-8519-3-2.5
: Vendor Revision -------------- 1A
: Vendor Serial Number --------- B2557JC
: Vendor Mfg. Date ------------- 10-26-2000
value =
0
Speed is set to Autorange
1
Speed is set to 1 Gb/sec
2
Speed is set to 2 Gb/sec
Parameter
Value
Meaning
Port
1
The SNC 4000 connection labeled FC1
Speed
0
Autorange
1
1 Gb/sec
2
2 Gb/sec
CAUTION
You must issue the
fcRestart
command or reboot the SNC 4000 for
the new setting to take effect. The initiator and the device must both
be capable of the selected speed. See the
fcRestart
command for
further information.
Parameter
Value
Meaning
Port
1
The SNC 4000 connection labeled FC1
Parameter
Value
Meaning
Summary of Contents for SNC 4000
