![background image](http://html1.mh-extra.com/html/quantum/snc-4000/snc-4000_user-manual_4004472047.webp)
SNC 4000 User’s Guide
41
Action Reference Table
Numerical references from the Action column in
Event Codes and Actions
on page 37 are associated with
the appropriate MAP in
Action Reference Table
on page 41.
114
1
1
Temperature is running in Warning or Alarm
Range
4
115
1
1
Network is running at 10 Mb/sec
7
Heartbeat Event Descriptions
CAUTION: These event codes are not logged in the Event Log. Notification of these
events occurs from the ADIC Management Console. For more information on Heartbeat,
see the
ADIC Management Console User’s Guide
.
200
5
NA
NA
The server could not verify the connection to
the SNC
7,3
201
6
NA
NA
The client could not communicate with the
server
7,9
202
6,7
NA
NA
The server could not communicate with the
client
7,9
203
6,8
NA
NA
Heartbeat communication restored
0
Notes:
1See
Table 6
on page 42.
2
See
Action Reference Table
on page 41.
3
Default Trap Threshold settings are explained “Events” in the ADIC Management Console User’s Guide.
4
Check the Event Log to find out which interface (FCAL or SCSI) caused this event. Then use the appropriate
action number.
5
This trap signals a change in state. A string sent with the trap will indicate the nature of the previous state.
6
Events not logged in SNC Event Log.
7
Not Reported. View the Server Log.
8
Event reported only when ADIC Management Console 2.7 or above is running
Table 5
Action Reference Table
Action
Number
Action
0
No action necessary
1
Go to
SCSI Channel MAP
on page 46
2
Go to
Fibre Channel MAP
on page 52
3
Go to
MAP for the SNC
on page 55
4
Go to
Temperature MAP
on page 55
5
Go to
Power MAP
on page 56
7
Go to
Ethernet MAP
on page 56
Table 4
Event Codes and Actions
Event
Code
Viewing
Level
1
Default Trap
Threshold
Description
Action
2
Summary of Contents for SNC 4000
