![background image](http://html1.mh-extra.com/html/quantum/snc-4000/snc-4000_user-manual_4004472069.webp)
SNC 4000 User’s Guide
63
Service Port Command Reference
A “shell” interface provides access to the management and configuration commands referenced in this
chapter. The shell is accessible by connecting a terminal or computer with terminal emulation software to
the SNC 4000 service port. For more information, see
Connecting to the Service Port
on page 23.
Managing the SNC 4000
The ADIC Management Console application is the preferred method for managing the SNC 4000. When
you use the ADIC Management Console, the operations described in this reference are carried out through
the client application. For more information, see the
ADIC Management Console User’s Guide.
Commands
This section specifies the commands that are available to control, manage, and service the SNC 4000. The
commands are listed alphabetically by function in Table 7. The commands are listed in alphabetical order
beginning on page 71.
Table 7
Commands Listed Alphabetically by Function
Command or Command
Group
Description
Page
disableCC
Disable Command and Control Interface
75
enableCC
Enable Command and Control Interface
76
setSnaCCLun
Change Command and Control Interface LUN
109
Data Mover
sncFeatureEnable
Enable the optional Data Mover feature
114
Data Path Conditioning
(Multi-path mapping)
ampFeatureEnable
Enable the optional multi-path mapping feature
71
ghostIOSet
Change the length of time that commands to FC
targets remain queued
85
Summary of Contents for SNC 4000
