![background image](http://html1.mh-extra.com/html/quantum/snc-4000/snc-4000_user-manual_4004472099.webp)
SNC 4000 User’s Guide
93
0009 FEB 21 2002 17:58:13 14 System 0: ES 1 CC 0/0 Prd 2 Snp 1 HP
1 fMax 254 RstI 0
loggerDumpCurrent [level]
Dump records from the system event log to the console with the
loggerDumpCurrent
command. Only
records logged since the system was booted are dumped. Level specifies the event log level for the events
as follows:
SNC4000 > loggerDumpCurrent 2
*** Dumping 5 current records (of 13 total) with level <= 2 ***
SEQUENCE TIME CODE DESCRIPTION
0007 FEB 26 2002 19:01:14 28 USCSI 2: Bus RESET
0010 FEB 26 2002 19:01:14 29 Mapping 1: Target Device Added:
index 0
, handle 0x08fda380
0012 FEB 26 2002 19:01:26 29 Mapping 1: Target Device Added:
index 1
, handle 0x09ffcf08
0013 FEB 26 2002 19:01:27 70 NOTICE: Reboot Complete
value = 0 = 0x0
SNC4000 >
ls or ll
The SNC 4000 contains a file system in its flash memory. Use the
ls
command to display the files as shown
below.
SNC4000 >ls
license.dat
sna.rc
vxWorks.stvalue = 0 = 0x0
To obtain detailed information about the file, use the
ll
command instead.
macShow
The
macShow
command displays the Media Access Control (MAC) address for the Ethernet interface.
SNC4000 > macShow
Enet MAC Address: 0.60.45.d.0.80
value = 33 = 0x21 = '!'
Number
Level
Explanation
0
Notice
Events recorded in the Event Log but not displayed by
the Event Viewer
1
Warning
Includes events that should always be reported, such
as device removals, and changes to temperature or
power systems
2
Information
Includes events that might result in later problems
Summary of Contents for SNC 4000
