72
Service Port Command Reference
------------------------------------------------------------------------
172.16.1.1 00:04:4e:15:64:8 405 0 10 ibmEmac0
172.16.34.209 00:60:97:ba:86:db 405 1 471 ibmEmac0
------------------------------------------------------------------------
value = 75 = 0x4b = 'K'
cd
You can move to a different directory (usually in the flash file system) using the
cd
command.
SNC4000 > cd "MGMT"
value = 0 = 0x0
clearReservation [devId]
The
clearReservation
command can be used to force-clear a reservation held by a host for the
specified target device. It may be necessary to issue this command if a host that has a reservation for a
shared device was disconnected from the SNC 4000 without properly shutting down the application
software that issued the reservation. If this is the case, other hosts that attempt to access the shared device
will repeatedly receive reservation conflict status from the device. Issuing this command may result in
resetting the target device.
SNC4000 > clearReservation 4
value = 0 = 0x0
The above example shows the
clearReservation
command being used to clear a reservation on a
target device at LUN 4.
cleHelp
The
cleHelp
command displays a list of the Command Log Event facility commands.
SNC4000 > cleHelp
CLE - Command Log Event facility
cleShow <lun> - Displays Logged Events for a specific LUN
cleShowAll - Displays Logged Events for All LUNs
value = 0 = 0x0
cleShow <LUN>
The
cleShow
command displays the last 64 Command Log events for a device at the specified LUN. This
log is not maintained for disk devices because the performance impact is significant. The manufacturer may
request the contents of the command log for diagnostic purposes. Information about interpreting these
events is not provided.
cleShowAll
The
cleShowAll
command performs a
cleShow
for all LUNs. The manufacturer may request the contents
of the command log for diagnostic purposes. Information about interpreting these events is not provided.
CAUTION
Be sure to suspend I/O before initiating this command.
Parameter
Value
devId
The index of the device (LUN)
Summary of Contents for SNC 4000
