Quantum SNC 4000, User Manual

Page: 8 / 164

2 SNC 4000 Introduction
Associated Documents
The following documents are associated with this guide:
• Scalar 24 Installation and Operation Guide (62-2301-01 Rev. A)
• ADIC Management Console 3.2 User’s Guide (6-00064-01 Rev. B)
Explanation of Symbols and Notes
The following symbols and highlighted passages note important information:
Environmental Notices and Statements
The following are the environmental notices and statements for the SNC 4000.
Product Recycling
This unit contains recyclable materials. These materials should be recycled where processing sites are
available and according to local regulations.
Lithium Battery
Laser Safety
This unit may contain a single-mode or multi-mode transceiver, both of which are Class 1 laser products.
The transceiver complies with IEC 825-1 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be
operated under the recommended operating conditions.
Usage Restrictions
The optical ports of the modules must be terminated with an optical connector or with a dust plug.
Symbol Damage to ... Signal Word Definition Consequence
Person WARNING: Imminent
hazardous electrical
situation Death or serious injury
Material CAUTION: Potential damaging
situation Possible damage to
the product, data, or
environment
NOTE: Indicates important
information that
helps make better
use of the system No hazardous or
damaging
consequences
WARNING
RISK OF FIRE, EXPLOSION, OR BURNS. DO NOT SHORT
CIRCUIT, CRUSH, HEAT ABOVE 100
N
C, INCINERATE, OR
DISASSEMBLE THE BATTERY.