Quantum SNC 4000, User Manual

Page: 128 / 164

122 Service Port Command Reference
FC1 WWPN=20100060.451702ca loopId=130 <next path>
FC2 WWPN=20200060.451702ca loopId=131
FC deviceId=2 SN= A276CC32
FC1 WWPN=20100060.451702ca loopId=130 <next path>
FC2 WWPN=20200060.451702ca loopId=131
value = 0 = 0x0
SNC >
trapDestAdd “ipAddress”
The
trapDestAdd
command allows you to add an ethernet address as a trap recipient to the SNMP trap
destination table that is maintained within the SNC 4000. The broadcast address for the Ethernet port is also
automatically included in the table. When the ADIC Management Console is running, it inserts its address
into the table automatically.
For more information, see the ADIC Management Console User’s Guide .
SNC4000 > trapDestAdd 192.168.1.75
value = 0 = 0x0
trapDestRemove “ipAddress”
The
trapDestRemove
command allows you to remove an ethernet address as a trap recipient from the
SNMP trap destination table that is maintained within the SNC 4000. When the ADIC Management Console
is running, it inserts its address into the table automatically.
For more information, see the ADIC Management Console User’s Guide .
The broadcast address for the Ethernet port is also automatically included in the table
SNC4000 > trapDestRemove "10.0.0.2"
value = 0 = 0x0
trapDestShow
The
trapDestShow
command allows you to view the SNMP trap destination table maintained within the
SNC 4000. The broadcast address for the Ethernet port is also automatically included in the table. When
the ADIC Management Console is running, it inserts its address into the table automatically.
For more information, see the ADIC Management Console User’s Guide .
SNC4000 > trapDestShow
Trap Destination IP Address
---------------------------
192.168.30.255
206.0.64.17
206.0.64.25
206.0.64.35
206.0.64.255
value = 1 = 0x1
tzSet “timezone”
The
tzSet
command sets the timezone offset from Greenwich Mean Time.
SNC4000 > tzSet "PDT"
TZ Set TIMEZONE
value = 0 = 0x0